Contact

Contact

Contact

Dry Bean

Seeding

Inoculation

Dry Beans

Seeding

Varieties

Inoculation

Fertility

Seed or Soil Borne Diseases

Foliar Diseases

Viral Diseases

Weed Control

Insects

Harvesting

Storage And Grading

Purpose of Inoculation

Like other pulse crops dry beans can fix some of their own nitrogen when inoculated, however, they are not as efficient at fixing nitrogen compared to peas, lentils, faba beans, or chickpeas. Dry beans generally can be expected to fix around half of their nitrogen requirements from fixation, but depending on environmental conditions, they may fix anywhere from five to 70 lb/ac of nitrogen. 

In Alberta, dry beans are generally not inoculated. Nitrogen fertilizer is used to ensure beans achieve maximum yields.

Inoculant Formulations

Though dry bean has a relatively poor ability to fix nitrogen compared to some other pulses, some input suppliers offer inoculants for dry beans in a variety of formulations.

 

Dry bean inoculants come in three formulations. Manufacturers may package the inoculant as either a mixed strain inoculant that contains a mixture of the strains, or a single-strain inoculant which contains only one rhizobia strain. In either case the best strains are chosen based on their ability to nodulate the crop on the label. 

 

All inoculant formulations will perform equally well if the inoculant is properly applied and if environmental conditions are ideal. Under adverse conditions the best performing formulation should be granular, followed by peat, and then liquid.

 

Inoculant for dry beans should be used when planting in a virgin field.

TIMING
  • Generally, inoculate your seed the day you’re seeding, but different brands or types have different storage limits and recommended application timing.
  • Some types of inoculants can also be mixed with fertilizer or pesticides. When choosing the right dry bean inoculant, talk to your input supplier and read all labels carefully.
PEAT POWDER INOCULANT 
  • Applied directly to the seed with a non-toxic sticking agent, this formulation is a finely ground peat that contains over a billion rhizobia per gram.
  • Powder/peat formulations are more durable and less prone to desiccation and seed treatment damage, compared to liquid formulations. The bacteria can still be killed by desiccation so the same precautions should be taken as with liquid.
  • Some peat-based powder inoculants require the use of a sticker. Adhesion to the seed can be enhanced if the seed is slightly damp during inoculation.
  • Peat powder inoculant is one of the most common types used in Canada.
LIQUID INOCULANT
  • This formulation, which also contains over a billion rhizobia per gram, is applied directly to the seed, and because it comes in liquid form, a sticking agent is typically included in the fluid.
  • Liquid inoculant comes in bags that make it easy to distribute evenly onto the seed while it is being augured into a truck box or through a drill fill.
  • Liquid-based products offer convenience and better control of application rate, compared to other forms. However, they are also more susceptible to damage prior to seeding from environmental extremes and seed treatments, than other inoculant forms.
  • If treated seed is planted immediately into a moist seedbed, liquid formulations perform well.
GRANULAR SOIL INOCULANT
  • Unlike peat powder or liquid inoculants, granular soil inoculant is not applied directly to the seed but, rather, with the seed in the seed row.
  • This formulation does, however, contain the same amount of rhizobia as both the powder and liquid inoculants and is gaining in popularity because of its convenience.
  • Under cold or very dry spring seedbed conditions, granular soil inoculation has shown considerable potential for producing large, stable yields and minimizing the risk of growing the crop.
  • Granular formulations are the least prone to exposure damage. They allow for precise application rates when an additional seed cart compartment is available.
  • Granular inoculants are less affected by seed-applied fungicides than other forms of inoculants.
MAXIMIZING RHIBOZIA SURVIVABILITY
  • Once the proper inoculant is chosen, steps should be taken to ensure maximum rhizobia survivability.
  • Rhizobium bacteria (either on the seed or in the package) die if they are exposed to stress such as high temperature, drying winds, or direct sunlight.
  • Inoculant must be stored in a cool dark place prior to use and must be used before the expiry date. Following application of the inoculant, plant into moist soil as soon as possible.
  • Inoculants are sensitive to granular fertilizer. Banding fertilizer to the side and/or below the seed is recommended. Never mix inoculant with granular fertilizer.
  • Inoculants are also sensitive to some seed-applied fungicides. Check the label of both the inoculant and seed treatment for compatibility.
  • When using a combination of fungicide and inoculant, apply the fungicide to the seed first, allow it to dry, and apply the inoculant immediately prior to seeding.

TIMING

  • Generally, inoculate your seed the day you’re seeding, but different brands or types have different storage limits and recommended application timing.
  • Some types of inoculants can also be mixed with fertilizer or pesticides. When choosing the right dry bean inoculant, talk to your input supplier and read all labels carefully.

PEAT POWDER INOCULANT 
  • Applied directly to the seed with a non-toxic sticking agent, this formulation is a finely ground peat that contains over a billion rhizobia per gram.
  • Powder/peat formulations are more durable and less prone to desiccation and seed treatment damage, compared to liquid formulations. The bacteria can still be killed by desiccation so the same precautions should be taken as with liquid.
  • Some peat-based powder inoculants require the use of a sticker. Adhesion to the seed can be enhanced if the seed is slightly damp during inoculation.
  • Peat powder inoculant is one of the most common types used in Canada.

LIQUID INOCULANT
  • This formulation, which also contains over a billion rhizobia per gram, is applied directly to the seed, and because it comes in liquid form, a sticking agent is typically included in the fluid.
  • Liquid inoculant comes in bags that make it easy to distribute evenly onto the seed while it is being augured into a truck box or through a drill fill.
  • Liquid-based products offer convenience and better control of application rate, compared to other forms. However, they are also more susceptible to damage prior to seeding from environmental extremes and seed treatments, than other inoculant forms.
  • If treated seed is planted immediately into a moist seedbed, liquid formulations perform well.

GRANULAR SOIL INOCULANT
  • Unlike peat powder or liquid inoculants, granular soil inoculant is not applied directly to the seed but, rather, with the seed in the seed row.
  • This formulation does, however, contain the same amount of rhizobia as both the powder and liquid inoculants and is gaining in popularity because of its convenience.
  • Under cold or very dry spring seedbed conditions, granular soil inoculation has shown considerable potential for producing large, stable yields and minimizing the risk of growing the crop.
  • Granular formulations are the least prone to exposure damage. They allow for precise application rates when an additional seed cart compartment is available.
  • Granular inoculants are less affected by seed-applied fungicides than other forms of inoculants.

MAXIMIZING RHIBOZIA SURVIVABILITY
  • Once the proper inoculant is chosen, steps should be taken to ensure maximum rhizobia survivability.
  • Rhizobium bacteria (either on the seed or in the package) die if they are exposed to stress such as high temperature, drying winds, or direct sunlight.
  • Inoculant must be stored in a cool dark place prior to use and must be used before the expiry date. Following application of the inoculant, plant into moist soil as soon as possible.
  • Inoculants are sensitive to granular fertilizer. Banding fertilizer to the side and/or below the seed is recommended. Never mix inoculant with granular fertilizer.
  • Inoculants are also sensitive to some seed-applied fungicides. Check the label of both the inoculant and seed treatment for compatibility.
  • When using a combination of fungicide and inoculant, apply the fungicide to the seed first, allow it to dry, and apply the inoculant immediately prior to seeding.

How Do I Know if the Inoculant Was Successful?

TIMING
  • Dry bean seed is often treated with Captan®; this fungicide can harm dry bean rhizobium – only apply inoculant to the seed immediately before seeding, or apply in granular form in the seed row.
  • Using sequential applications where the seed treatment is applied and dried before the inoculant is applied will help reduce the negative interactions.
  • Simultaneous applications can be done with some seed treatments and inoculant formulations but are riskier and the seed should be seeded immediately. Using granular inoculant applied in row with the seed will help to avoid issues with compatibility. 
HOW TO CHECK
  • The effectiveness of inoculation can be checked by examining the pulse crop at early flowering. It may take three to four weeks after seed germination before nodulation reaches a point where it can be evaluated.
  • Although dry bean is an excellent nitrogen fixer and the nodules can be easily seen when a plant is pulled from the ground. The best way to check for nodulation is to dig a plant and gently remove the soil from the roots by washing in a bucket of water.
  • Nodules are fragile and readily pull off if the roots are pulled out of the soil.
  • Watch: Nodulation Scoring Video 
WHAT SHOULD I EXPECT?
  • Nitrogen fixation is synchronized with plant growth, supplying the crop nitrogen during rapid vegetative growth.
  • Seed applied inoculant should result in nodules forming on the primary root near the crown.
  • If the inoculant was soil applied (granular), nodules should be found on primary and secondary roots.
  • If nitrogen fixation is active, the nodules will be pink or red on the inside.
  • Lack of nodules indicates rhizobia did not infect the pulse plant.
  • Lack of a pink colour (usually green or cream coloured) indicates the rhizobia are not fixing nitrogen.
  • Nitrogen fixation declines once plants begin pod formation and seed development.
NATURALLY OCCURRING
  • Some sites show little to no response to inoculation with any formulation as these sites had previous pulse crops or naturally occurring (native) rhizobia.
USE AT RECOMMENDED RATES
  • When seeding on land with no known history of pulses, it’s best to use inoculant at recommended rates. Although some rhizobia occur naturally in soils, it’s important to ensure sufficient numbers of the correct strain of highly effective rhizobia are present when the seed germinates.

TIMING
  • Dry bean seed is often treated with Captan®; this fungicide can harm dry bean rhizobium – only apply inoculant to the seed immediately before seeding, or apply in granular form in the seed row.
  • Using sequential applications where the seed treatment is applied and dried before the inoculant is applied will help reduce the negative interactions.
  • Simultaneous applications can be done with some seed treatments and inoculant formulations but are riskier and the seed should be seeded immediately. Using granular inoculant applied in row with the seed will help to avoid issues with compatibility. 

HOW TO CHECK
  • The effectiveness of inoculation can be checked by examining the pulse crop at early flowering. It may take three to four weeks after seed germination before nodulation reaches a point where it can be evaluated.
  • Although dry bean is an excellent nitrogen fixer and the nodules can be easily seen when a plant is pulled from the ground. The best way to check for nodulation is to dig a plant and gently remove the soil from the roots by washing in a bucket of water.
  • Nodules are fragile and readily pull off if the roots are pulled out of the soil.
  • Watch: Nodulation Scoring Video 

WHAT SHOULD I EXPECT?
  • Nitrogen fixation is synchronized with plant growth, supplying the crop nitrogen during rapid vegetative growth.
  • Seed applied inoculant should result in nodules forming on the primary root near the crown.
  • If the inoculant was soil applied (granular), nodules should be found on primary and secondary roots.
  • If nitrogen fixation is active, the nodules will be pink or red on the inside.
  • Lack of nodules indicates rhizobia did not infect the pulse plant.
  • Lack of a pink colour (usually green or cream coloured) indicates the rhizobia are not fixing nitrogen.
  • Nitrogen fixation declines once plants begin pod formation and seed development.

NATURALLY OCCURRING
  • Some sites show little to no response to inoculation with any formulation as these sites had previous pulse crops or naturally occurring (native) rhizobia.

USE AT RECOMMENDED RATES
  • When seeding on land with no known history of pulses, it’s best to use inoculant at recommended rates. Although some rhizobia occur naturally in soils, it’s important to ensure sufficient numbers of the correct strain of highly effective rhizobia are present when the seed germinates.
WATCH - NODULATION SCORING VIDEO
  • Resources

Special thanks to Saskatchewan Pulse Growers